This is general guidance for UK businesses, based on the sources listed at the end of the page. Your supplier is the only one who can confirm what your own equipment needs. Check each device with its maker or installer, and do it before the line is moved.
Who is affected
- Intruder, fire and personal alarms that call a monitoring centre over a phone line, and telecare and health-monitoring devices. Openreach lists house alarms, telecare and health monitoring devices among equipment that may be affected and tells businesses to check each device with its supplier.[1]
- The security inspectorate NSI warns that a traditional telephone connection, including an intruder alarm, may no longer be able to send signals to alert anyone. Some analogue-based alarms may stop working, others need minor changes, and an alarm will probably need reconnecting after the switch.[3]
- The TEC Services Association (TSA) says social alarm and telecare response services are becoming increasingly unstable during the move to digital, affecting the 1.8 million people who rely on them. If you run a care, housing or residential business, treat this as a service-continuity issue, not just an IT one.[5]
What happens after 31 January 2027
Openreach is retiring the analogue phone network (the PSTN) by 31 January 2027. Openreach says lines that have not switched by then may have a limited service.[1]
Openreach describes Emergency Voice Access (EVAc) as a temporary, voice-only emergency service for basic calls, available for a limited time and possibly without the calling features you use now. Reporting on Openreach's pilot says it will not carry broadband, ISDN or critical alarm and lift signals. It is a last-resort safety net, not a plan.[1][2]
Digital phone lines need mains power. Openreach says to tell your provider if you rely on a landline, have poor mobile signal or use telecare or health devices, so that battery back-up can be arranged.[1]
Openreach's alarm-industry factsheet flags a loss of support for high-speed DTMF signalling, weaker line-cut monitoring because copper lines lose their 50V charge, and a risk that existing monitored systems are left disconnected after a provider upgrade.[4]
What to do, step by step
- 1List every alarm and telecare unitWalk the site and note each intruder panel, fire panel, panic button, pendant and health-monitoring device, including outbuildings and any shared with a landlord.
- 2Ask the installer how each one signalsIs it analogue, IP, mobile or a mix? Ask for the answer in writing, with the monitoring centre's name.
- 3Ask for a written upgrade quote that explains whyNSI advises asking for a detailed quote explaining why any change is needed, and confirming it is compatible with the new digital service.[3]
- 4Plan for power cutsAsk what the alarm and the router do in a power cut, and who supplies the battery back-up.
- 5Tell the installer your switch dateDo not let the phone line be ceased before the alarm has a working path. Agree an order of work and a test slot.
- 6Test after the switch, not beforeTrigger a test signal and ask the monitoring centre to confirm it arrived. Repeat after any router or broadband change.
Questions to ask your supplier
- How does this panel or unit send signals today: analogue line, IP, mobile or a combination?
- Will it work through a broadband router and adaptor, or does it need replacing?
- Does our monitoring centre accept the new signalling path, and have they confirmed it?
- What happens if power or broadband fails, and what back-up is included?
- Who tests it after the switch, and how will we know the signal reached the centre?
- Are you certified by an independent body? NSI recommends a UKAS-accredited certification body.
Mistakes to avoid
- Assuming whoever moves your phone line will also check the alarm. Openreach's factsheet warns monitored systems may be left disconnected after a provider upgrade.[4]
- Relying on Emergency Voice Access. It is voice-only and not designed to carry alarm signals.
- Leaving it until the last month, when installers are busiest.
- Forgetting secondary devices such as a separate fire panel, a lone-worker pendant or an outbuilding alarm.
- Testing only that the phone rings, not that the alarm reports.
Frequently asked questions
Will my burglar alarm stop working after the switch-off?
It might. If it signals over a copper phone line it may no longer reach the monitoring centre once the line moves. NSI says some analogue-based systems may stop working while others need minor changes, so ask your alarm company to check yours.
Are telecare devices affected?
Yes, many use analogue connections. The TEC Services Association says telecare and social alarm services are becoming increasingly unstable during the move to digital. Speak to the telecare supplier and tell your phone provider you use telecare.
Do digital phone lines work in a power cut?
Not without back-up. Openreach says digital lines need power, and asks customers who rely on the line, or have poor mobile signal, to tell their provider so battery back-up can be arranged.
Can Emergency Voice Access keep my alarm working?
No. Openreach describes it as a temporary, voice-only service, and reporting on the pilot says it will not carry critical alarm signals. Move the alarm to a digital path before 31 January 2027.
Who should I call first?
Your alarm or maintenance provider, before the phone line is upgraded. NSI advises this, and suggests using an installer approved by an independent UKAS-accredited certification body.
Related help
For the phone side of the move, see Hosted VoIP, Number porting. Or get matched quotes from up to three providers.
Sources
Last reviewed 21 November 2026. Every page below was read on that date. Trade and supplier pages are labelled as such and are used for practical detail, not as official position.
- [1]Openreach: the big switch-off (Openreach)
- [2]Openreach pilot emergency UK phone lines for 2027 analogue switch-off (April 2026) (ISPreview)
- [3]UK transition from analogue to digital landlines (alarms) (NSI)
- [4]Alarm industry factsheet (Openreach)
- [5]Transitioning your social alarm systems from analogue to digital (TEC Services Association (TSA))