The UK analogue phone network is retired by 31 January 2027.

Switch-off guide

ISDN switch-off 2027: how to replace ISDN2 and ISDN30

ISDN services stop working from 31 January 2027 if they are not moved to an IP-based service, and they cannot be moved automatically. Replace them with a SIP trunk if your PBX is modern, or hosted voice if it is not, and port your DDI numbers before the old circuits are ceased.

Last reviewed 21 November 2026

This is general guidance for UK businesses, based on the sources listed at the end of the page. Your supplier is the only one who can confirm what your own equipment needs. Check each device with its maker or installer, and do it before the line is moved.

Who is affected

  • Anyone with an ISDN2 or ISDN30 circuit, usually carrying a main switchboard number and a range of direct dial-in (DDI) numbers into a PBX.
  • BT says some services, including ISDN, Featureline and multiline, cannot be moved automatically, and that these services will stop working from 31 January 2027 if you do not move them to an IP technology solution.[3]
  • GOV.UK guidance says providers advise business customers to migrate early and to review equipment that relies on the PSTN or ISDN, including analogue phones, alarms, payment terminals, lifts and intercoms.[5]

What happens after 31 January 2027

Openreach is retiring the analogue phone network (the PSTN) by 31 January 2027. Openreach says lines that have not switched by then may have a limited service.[1]

ISDN is not a candidate for Emergency Voice Access. Reporting on Openreach's pilot says the service will not carry broadband, ISDN or critical alarm and lift signals, so unmigrated ISDN circuits should be treated as ending.[2]

You can keep your numbers. BT says you can keep your current phone numbers when moving to a digital, IP technology solution, and that it guides customers through number porting. Pricing may change after the move.[3]

SIP trunk or hosted voice? A UK reseller's guide describes the choice this way.[4]

OptionBest whenNotes from the guide
Keep your PBX with a SIP trunkThe PBX is modern and SIP-compatibleUsually the quickest and cheapest route
Replace the PBX with hosted VoIPThe PBX is old or end-of-lifeReplaces the PBX and ISDN together
Microsoft Teams with Direct RoutingYou want telephony inside TeamsSIP trunks provide the public phone connection

What to do, step by step

  1. 1Audit circuits and numbersCount ISDN2 and ISDN30 circuits, note the site each serves, and record every DDI range. A reseller guide says DDI ranges can usually be ported to a new provider.[4]
  2. 2Measure peak call demandCheck peak simultaneous calls, not just total channels, so the replacement is sized properly.[4]
  3. 3Check the PBX and connected servicesNote the PBX make, age and SIP support, and list non-voice services on the lines such as fax, alarm dialers and EPOS.[4]
  4. 4Choose SIP trunk or hostedUse the table above. If the PBX is modern and SIP-compatible, a SIP trunk is usually quickest and cheapest.
  5. 5Check your connectionThe guide suggests about 100 Kbps per simultaneous call, so 20 concurrent calls need at least 2 Mbps dedicated plus headroom for data, and says ADSL is not suitable for VoIP.[4]
  6. 6Request the port earlyThe guide says geographic and non-geographic numbers can generally be ported, to allow roughly 10 to 20 business days, and warns late requests in 2026 and 2027 may face longer queues.[4]
  7. 7Pilot, go live, then ceaseRun a short pilot, switch everyone over, confirm the port completed and calls route correctly, and only then cancel the ISDN circuits.

Questions to ask your supplier

  • Can you port our full DDI range and our main number together?
  • Is your SIP trunk compatible with our PBX model, and who confirms it?
  • How many simultaneous calls are included, and what happens at peak?
  • How are fax, alarm dialers and card terminals on the ISDN lines handled?
  • What is the cutover plan, and how do we fall back if something fails?
  • What will early termination charges on the ISDN contract be?

Mistakes to avoid

  • Ceasing ISDN before the port has completed.
  • Sizing the replacement on total lines rather than peak simultaneous calls.
  • Buying a SIP trunk for a PBX that does not support SIP.
  • Forgetting alarm dialers, fax and card terminals on the same ISDN lines.
  • Running VoIP over ADSL, which the guide says is not suitable.

Frequently asked questions

When does ISDN stop?

BT says ISDN services will stop working from 31 January 2027 if you do not move them to an IP technology solution, and that they cannot be moved automatically.

Can I keep my DDI numbers?

Usually. A UK reseller guide says DDI ranges can usually be ported, and BT says you can keep your current numbers when moving to an IP solution. Confirm the full range with your new provider.

SIP trunk or hosted VoIP?

A SIP trunk keeps your PBX and is usually quickest and cheapest if the PBX is modern and SIP-compatible. Hosted VoIP replaces an old PBX and ISDN together.

How long does porting take?

A reseller guide suggests allowing roughly 10 to 20 business days, depending on the losing provider, and warns late requests may face longer queues. Start early.

Can Emergency Voice Access carry ISDN?

No. Reporting on the Openreach pilot says it will not carry ISDN.

Related help

For the phone side of the move, see SIP trunks, Hosted VoIP, Number porting. Or get matched quotes from up to three providers.

Sources

Last reviewed 21 November 2026. Every page below was read on that date. Trade and supplier pages are labelled as such and are used for practical detail, not as official position.

  1. [1]Openreach: the big switch-off (Openreach)
  2. [2]Openreach pilot emergency UK phone lines for 2027 analogue switch-off (April 2026) (ISPreview)
  3. [3]The PSTN and ISDN switch-off: what it means for you (BT Business)
  4. [4]ISDN to VoIP migration: step by step (Connection Technologies (UK reseller guide))
  5. [5]Moving landlines to digital technologies (GOV.UK)